UNii I/O Modules

  • 2 possible versions

  • Fast and Easy installation
  • Built-in buzzer for location determination

With the UNii I/O module for the UNii alarm system it is possible to expand the system with wired zones. The variant including power supply has the option to also expand outputs.

Including PSU
004660

  • Fast and easy installation
  • Standard 8 inputs, expandable to 32 zones
  • 2 relay outputs 30VDC / 1A
  • 2-open collector (OC) outputs 200mA
  • Speaker (LS) output
  • Siren output, monitored
  • Supplied in metal housing with 2.77A power supply
  • Built-in buzzer for location determination
  • EN50131 approved (Grade 3)

The UNii I/O module (incl. PSU) in metal cabinet is standard equipped with its own power supply 2.77A and a battery charging circuit to charge and monitor an emergency power battery.

Characteristics

The UNii I/O module (incl. PSU) in metal case is equipped with its own 2.77A power supply and a battery charging circuit to charge and monitor a backup battery. This module is also equipped with eight wired zones and six outputs (two relays, two open collector outputs (max. 200mA), a speaker output (8 ohm) and a siren output (monitored).

Expansion of inputs

The UNii I/O module (incl. PSU) can be expanded with 8 input expansion boards (max. 3) to be able to connect a total of 32 zones in the cabinet.

Relay and OC expansion

The UNii I/O module can also be expanded with an output expansion board (max. 1). These are available in a version with 4 relay contacts or 4 open collector outputs (max. 200 mA).

Specifications
Supply voltage: 230V-18VAC @ 2.77A, toroidal transformer
Normal Current drain: 90 mA
Maximum current drain: 2A
Inputs: 8
Outputs: 4 (2x relay, 2 open collector 200mA)
2 (1x speaker, 1x siren)
Operating temperature: 0 ˚ to +50 ˚ C
Dimensions: 255 x 120 x 400mm (LxWxH)
Color: White
Weight: 5660 g
Certification: EN50131 approved (Grade 3)

Excluding PSU
004662

  • Fast and easy installation
  • Standard 8 inputs, expandable to 16 zones
  • 4-open collector (OC) outputs 200mA
  • Supplied in a small metal housing without power supply
  • Built-in buzzer for location determination
  • EN50131 approved (Grade 2)

The UNii I/O module (excl. PSU) in a compact metal box does not include a power supply and must be powered via the RS-485 bus. This module is equipped with eight wired zones and two outputs (two open collector outputs, max. 200 mA).

Characteristics

The UNii I/O module (excl. PSU) in a compact metal cabinet does not include power and must be powered via the RS-485 bus. This module has eight hardwired zones and two outputs (two open collector outputs, max. 200 mA).

Expansion of inputs

The UNii I/O module (excl. PSU) can be expanded with an 8-input expansion board (max. 1) to be able to connect a total of 16 zones in the cabinet. The UNii I/O module (excl. PSU) cannot be expanded with extra outputs.

Specifications
Supply voltage: via RS-485 bus
Normal Current drain: 60 mA
Inputs: 8
Outputs: 4 (open collector 200mA)
Operating temperature: 0 ˚ to +50 ˚ C
Dimensions: 177 x 155 x 35 mm (LxWxH)
Color: White
Weight: 2090 g
Certification: EN50131 approved (Grade 2)

Extra Modules

All extension modules for inputs, open collector and relays are universally designed and can therefore be used in both the UNii control panel and the I/O module. This gives you a suitable solution for every conceivable situation and always the right print ready and it prevents unnecessary stock of different components. Flexible design, expandability, efficient and cost effective for you as an installer!

UNii input module

  • 8 zones
  • Print including cable
  • Applicable to UNii central and UNii I/O module
  • EN50131 approved (Grade 3)

UNii output module

  • 4 relais of OC outputs
  • Print including cable
  • Applicable to UNii central and UNii I/O module
  • EN50131 approved (Grade 3)
  • UNii output expansion print 4 OC
    • 4 open collector (o.c.) outputs 200mA
    • Can be connected to UNii central and / or UNii I/O module including power supply by means of supplied ribbon cable (item no. 004660)
    • Maximum 1 pieces to be connected per central or I/O module
    • Not to be used in combination with UNii I/O excluding power supply (item no. 004662)!
    • Dimensions: 80 x 40 x 10mm
    • EN50131 approved (Grade 3)

Ordering Information

ARTICLE NUMBER DESCRIPTION
004664 UNii input module
004666 UNii output module
004668 UNii output expansion print 4 OC