Quiz wireless interface

Quiz Summary

0 of 10 Questions completed

Questions:

You have already completed the quiz before. Hence you can not start it again.

Quiz is loading…

You must sign in or sign up to start the quiz.

You must first complete the following:

Results

Quiz complete. Results are being recorded.

Results

0 of 10 Questions answered correctly

Your time:

You have reached 0 of 0 point(s), (0)

Current
Review
Answered
Correct
Incorrect

Question 1 of 10

1. Question
You have a UNii 32 and would like to mount a second wireless interface for 10 zones at the back of the object, is this possible?
- No, a UNii 32 has a maximum of 1 wireless interface. The UNii will need to be upgraded to a UNii 128 version.
- Yes, on an UNii 32, 32 inputs may be actively programmed
Correct

Incorrect
Question 2 of 10

2. Question
A UNii 128 may have two wireless interfaces installed. Besides a second wireless interface and cabling, what is required?
- A second RS485 bus module
- Nothing, the existing bus can be used for the second wireless interface
- A wireless interface from the same brand
Correct

Incorrect
Question 3 of 10

3. Question
When using 2 wireless keypads, do the same sections and exit buzzers have to be set for both keypads?
- This is set per user
- Yes, These need to be the same
- No, sections and exit buzzers can be set per keypad
Correct

Incorrect
Question 4 of 10

4. Question
Is it possible to only use the strobe output on a Pyronix deltabell?
- Yes, the strobe output can be enrolled and only use the strobe output
- Yes, it is possible to both enrol the siren and strobe separately
- No, the siren and strobe can not be controlled separately
Correct

Incorrect
Question 5 of 10

5. Question
With a UNii 128, a second wireless interface can be used. Should the applied brand of the first wireless interface be taken into account?
- Yes, the same brand should be used.
- No, the second wireless interface can use any other brand
- This is not possible with a UNii 128
Correct

Incorrect
Question 6 of 10

6. Question
A component is not receiving well from the wireless interface, can a repeater solve this problem?
- No, as long as the component is received by the interface, the repeater will not work properly
- The component may be defective, replace it
- Yes, the repeater has the best signal strength
Correct

Incorrect
Question 7 of 10

7. Question
A smoke detector has give a “clean me” notification, what is the best course of action?
- Blowing in the smoke detector with your mouth, and "hitting" out the dust
- Replace the smoke detector immediately
- Blow out the smoke detector with compressed air and check if the polution level has dropped
Correct

Incorrect
Question 8 of 10

8. Question
The customer would like to secure a door with a lot of glass what could be the advantage of a wireless component here?
- A wireless component can be mounted faster and thus cheaper
- There is no adanvantage, wired components can do the same
- The magnetic contact can be smaller, thus easier to mount
Correct

Incorrect
Question 9 of 10

9. Question
The signal from a Pyronix component is not coming through properly, can a repeater be used?
- Yes, this is possible
- No, only the UNii elite components can use a repeater
- This is solved by installing cabled and use a wired component
Correct

Incorrect
Question 10 of 10

10. Question
At the front of the property is the wireless interface. You would like to have a wireless component at the back (distance 100 metres) as well.
Can this be done with a wireless repeater?
- Yes, as long as the repeater has contact with the wireless interface
- As long as enough repeaters are stacked, the signal can be put through
- No, the distance is probably too far for the repeater so contact the wireless interface
Correct

Incorrect

UNii – Wireless components

Quiz Summary

Information

Results

Results

Categories

1. Question

2. Question

3. Question

4. Question

5. Question

6. Question

7. Question

8. Question

9. Question

10. Question